Qtcam Application - 22.0.29
---------------------------
*Added support for See3CAM_130D and See3CAM_24CUG.
*Added See3CAM_160_EVALKIT PID.

Qtcam Application - 22.0.28
---------------------------
*Changed all png images with incorrect icc profile.
*Suppressed libavcodec warnings.
*Added fix for live preview corruption in 18.04 when swicted between Preview and Record node in Hypreyon Dual Stream.
*Added fix for manual focus issue in See3CAM_CU55MH.

Qtcam Application - 22.0.27
---------------------------
*Added Fix H264 Quality was disabled when CBR mode was active.

Qtcam Application - 22.0.26
---------------------------
*Added PID for enumetating extension unit HyperyonDualStream Device.
*Added CBR control for HyperyonDualStream Device.

Qtcam Application - 22.0.25
---------------------------
*Added fix for Inconsistently corruption occurs while switching to Record mode from Preview mode in Hyperyon Dual stream.


Qtcam Application - 22.0.24
---------------------------
*Added fix for crash while streaming mjpeg on embedded boards.

Qtcam Application - 22.0.23
---------------------------
*Added fix for crash while streaming on See3CAM_10CUG_CH

Qtcam Application - 22.0.22
---------------------------
* Added fix to avoid image capture while application is in recording mode.
*Added fix for cu135 when changed from trigger mode to master mode Image capturing even when application is in recording mode.

Qtcam Application - 22.0.21
---------------------------
* Implemented Flicker Detection Mode for See3CAM_CU130

Qtcam Application - 22.0.20
---------------------------
* Added fix for preview corruption while changing AutoExposureMode in Hyperyon.
* Added fix for Hyperyon Cross Resolution bug.

Qtcam Application - 22.0.19
---------------------------
*Removed HDR + LFM mode from extension settings for See3CAM_CU22.
*Added Default button in extension settings for See3CAM_CU22.
Qtcam Application - 22.0.18
---------------------------
* Added fix to avoid aliasing effect in preview for 640x480 resolution.
* Added fix to avoid Green frame while switching between resolutions in H264 format for Hyperyon.
* Added fix to avoid flicker while switching between resolutions in MJPG format in Hyperyon.

Qtcam Application - 22.0.17
---------------------------
* Added Fix for Disable option in ROI Exposure for Hyperyon.
* Disabled Default button in extension settings for See3CAM_CU22.

Qtcam Application - 22.0.16
---------------------------
* Added Disable option in ROI Exposure for Hyperyon.
* Implemented support to change the frameRate while capturing still in Hyperyon.
* Disabled "i" key for image capture while UI is in video Record Mode.
* Fixed issue of failing Set Request for Exposure in See3CAM_CU30 camera.
 
Qtcam Application - 22.0.15
---------------------------
* Added fixes for See3CAM_20CUG issues.
* Added support for See3CAM_CU22 camera.
* Added fix for the preview hang issue while swiching between resolutions for See3CAM_CU30 camera and See3CAM_CU22 camera.
* Rendering the preview using Opengl Shaders.

Qtcam Application - 22.0.14
---------------------------
* Disabled video record option for 320x240 resolution in See3CAM_20CUG camera.

Qtcam Application - 22.0.13
---------------------------
* Fixed issue of getting Streaming in Trigger Mode for See3CAM_CU20 camera.
* Not allowing White Balance Text box to be modified by user.
* Added fix for the issue of enumerating Device name twice in case of higher Kernal Version's.
* Fixed issue of disabling camera Settings option on switching Trigger mode to Master Mode in See3CAM_CU135 camera. 

Qtcam Application - 22.0.12
---------------------------
* Added support to See3CAM_20CUG camera.
* Fixed issue of getting video save message box on pressing Space bar for all See3CAM camera's.

Qtcam Application - 22.0.11
---------------------------
* Fixed issue of no preview while switching between cameras for See3CAM_CU55M camera.
* Added fix to avoid glitches in a recorded video in h264 encoder type.

Qtcam Application - 22.0.10
---------------------------
* Fixed issue of Video Record and Image Capture Button disabling while switching from Trigger to Master Mode in See3CAM_CU55_MH camera.
* Fixed issue of preview resize window in 18.04. 

Qtcam Application - 22.0.9
---------------------------
* Fixed issue of Preview hang in Stream Mode when unplug and plug the device for See3CAM_CU55_MH camera.
* Fixed issue of "Unable to record Video" display message while recording video in h264 encoder format for See3CAM_CU55_MH camera.
* Fixed issue of preview hang while capturing multiple images(more than 50) in 1080p resolution in Y12 (.jpg)format for See3CAM_CU55_MH camera.
* Fixed issue of no preview while using Retrieve in higher resolutions for FSCAM_CU135 camera. 

Qtcam Application - 22.0.8
---------------------------
* Changed product from See3CAM_CU1317 to FSCAM_CU135 for storage camera.

Qtcam Application - 22.0.7
---------------------------
* Added support for See3CAM_CU55-MH
* Fixed issue of updating led controls wrongly
* Fixed issue of application hang in 32-bit PC for See3CAM_CU50 camera
* Fixed issue of getting Green/Pink colour preview while switching resolutions in Hyperyon

Qtcam Application - 22.0.6
---------------------------
* Fixed issue of getting Greencolour image on capturing still in h264 in Hyperyon.
* Fixed issue of exposure UI in UVC Settings updated wrongly in See3CAM cameras.
 
Qtcam Application - 22.0.5
---------------------------
* Fixed issue of updating Exposure Compensation wrongly on unplugging and plugging device in See3CAM_CU50 camera.
* Fixed issue of enabling camera Settings on pressing spacebar for all See3CAM cameras.
* Fixed issue of enabling whitebalance textbox even whitebalance is disbled for all See3CAM cameras.
Qtcam Application - 22.0.4
--------------------------
* Implemented LED Control and Flicker Detection Control for See3CAM_CU1317 camera.
* Implemented Flicker Detection Control for See3CAM_CU135,See3CAM_CU55,See3CAM_CU30,See3CAM_130 cameras and disabled powerline Frequency in UVC Settings.
* Implemented ROI Exposure only when HDR is OFF and getting RoiWindow Size from camera dynamically for Hyperyon.
* Fixed issue of getting Dewarp State as ON on clicking default in Hyperyon.

Qtcam Application - 22.0.3
--------------------------
* Fixed issue for store button enabled in case of trigger modes for See3CAM_CU1317 camera.
* Made necessary changes in document for See3CAM_CU1317 camera.
* Added SkipFrames based on UsbSpeed for See3CAM_CU50 camera. 
 
Qtcam Application - 22.0.2
--------------------------
* Fixed crash issue while swiching resolutions in Hyperyon.
* Fixed issue of stride while streaming in MJPG in Hyperyon.
* Removed "YUY" encoder(raw video).
* Fixed issues of see3cam cameras.

Qtcam Application - 22.0.1
--------------------------
* Added support for ROI Exposure and Removed Light mode in Hyperyon.
* Fixed hang issue while capturing in see3camcu51.

Qtcam Application - 22.0.0
--------------------------
* Added Store and Retrieve ,supporting to store frames in camera.
* Added support for See3CAM_CU1317 camera.

Qtcam Application - 21.0.1
--------------------------
* Camera name is made correctly when enabling embed data in See3CAM_CU38 camera.

Qtcam Application - 21.0.0
--------------------------
* Added audio capture settings to record video with audio using usb audio devices.
* Added support for See3cam_cu38 camera.

Qtcam Application - 20.0.0
--------------------------
* Added support for eCAM22_USB camera.
* Rendering method is moved from QPainter to Opengl.
* Avoid usage of v4lconvert for rendering frame.

Qtcam Application - 19.0.1
--------------------------
* Removed face exposure ROI, smile trigger and smile threshold configuration.

Qtcam Application - 19.0.0
--------------------------
* Added support for See3CAM_130A camera.

Qtcam Application - 18.0.0
--------------------------
* Added support for see3cam_55 camera.
* Fixed issue of not able to access extension unit when camera name received via
“udev” and “v4l2” are different.[Ex:Tania, See3cam_80 cameras]
* Fixed issue of sending command to set uvc control values when selecting the
camera.

Qtcam Application - 17.0.4
--------------------------
* Fixed issue of zoom Default Zoom value does not change for other resolution
* Fixed issue of zoom is not reflected in preview when
clicking hardware default.

Qtcam Application - 17.0.3
--------------------------
* Fixed issue of face rectangle is shown in captured image.

Qtcam Application - 17.0.2
--------------------------
* Changed trigger mode as stream[preview] mode in see3cam_cu135 and see3cam_130 camera.

Qtcam Application - 17.0.1
--------------------------
* Renamed NileCAM_CU30 as NileCAM30_USB camera.
* Fixed issue of displaying face rectangle in captured image when preview and still are in same format and resolution [ NileCAM30_USB].
* Fixed issue of capturing images in smile trigger when recording video [ Smile trigger supported cameras ].

Qtcam Application - 17.0.0
-----------------------------
* Added support for NileCAM_CU30_USB camera.

Qtcam Application - 16.0.11
-----------------------------
* Fixed issue of "preview turns into white" when clicking image quality settings and hardware default in see3cam_11cug camera.
* Added smile trigger support for following list of cameras
    See3cam_30
    See3cam_cu130
    See3cam_130
    See3cam_cu135
    See3cam_cu30

Qtcam Application - 16.0.10
-----------------------------
* Added QFactor control in ascella camera[extension unit].

Qtcam Application - 16.0.9
-----------------------------
* Fixed issue of not able to capture images when external trigger button is pressed.

Qtcam Application - 16.0.8
-----------------------------
* Added face ROI and flash control features in See3cam_cu30 camera.
* Fixed issue of not enabling settings in side bar when clicking capture button when See3cam_cu20 camera in trigger mode.

Qtcam Application - 16.0.7
-----------------------------
* Added exposure compensation feature in see3cam_cu20 camera.

Qtcam Application - 16.0.6
-----------------------------
* Fixed delay in launching Qtcam application.

Qtcam Application - 16.0.5
-----------------------------
* Added face ROI support in See3cam_cu135 and See3Cam130 camera.

Qtcam Application - 16.0.4
-----------------------------
* Added notification to user that application must be launched using sudo.
* Bug Fixes: 1. Streaming is not available for higher resolution when unplug and plug cu130 camera without closing application,.
           2. fps index is not displaying properly in frame rate box when swithing resolution.
Qtcam Application - 16.0.3
-----------------------------
* Added R2 features for cu130 camera.
   1. Flip control
   2. ROI Auto Exposure
   3. Exposure compensation
   4. Denoise
   5. Burst length
   6. Q-Factor
   7. Face Detection
   8. Smile Detection
   9. Frame Rate control

Qtcam Application - 16.0.2
-----------------------------
* Fixed bug for see3cam_30 camera: Default exposure value is not restored properly when selecting hardware default in ubuntu 16.04 version.

Qtcam Application - 16.0.1
-----------------------------
* Added R2 features for see3cam_30 camera.
   1. Scene Mode
   2. Face Detection
   3. Smile Detection
   4. Frame rate control
   5. Exposure compensation

Qtcam Application - 16.0.0
-----------------------------
* Added support for CX3-SNI-RDK [ TANIA ] camera.

Qtcam Application - 15.0.1
-----------------------------
Changes in See3cam_cu20 camera:
1. Bug Fix: Manual Exposure is not applied properly in camera preview when clicking default in Image Quality Settings menu.
2. Some control names are modified in extension unit.

Qtcam Application - 15.0.0
-----------------------------
* Added support for see3cam_cu20 camera.

Qtcam Application - 14.0.3
-----------------------------
* Added R2 features for see3cam_cu30 camera.

   1. Scene Mode
   2. ROI control
   3. Burst Mode
   4. Q Factor
   5. Flip controls
   6. Face Detection
   7. Smile Detection
   8. Frame rate control
   9. Exposure compensation

Qtcam Application - 14.0.2
----------------------------
* Fixed bugs:
  1. Image not captured while 'sidebar hide option' clicked.
  2. Video Recording started automatically after unplug device and click in preview area.
  3. Brightness, Pan & Tilt controls minimum values not properly restored in that control text boxes.

Qtcam Application - 14.0.1
----------------------------
* Fixed issue of not able to capture image using mouse left click in preview area when trying to capture image in trigger mode 
  then trying to capture image in master mode.

Qtcam Application - 14.0.0
--------------------------
* Added support for see3cam_cu135 camera.

Qtcam Application - 13.1.1
--------------------------
* Bugfixes in features of see3cam_130 camera.

Qtcam Application - 13.1.0
--------------------------
* Implemented flash control for See3cam_cu40 camera.

Qtcam Application - 13.0.0
--------------------------
* Added support for See3CAM_81 camera.
* The following additional features are supported in see3cam_130 camera.
	1. Face detection
	2. Smile detection
	3. Exposure compensation
	4. Frame Rate Control
Qtcam Application - 12.0.0
--------------------------
* Added support for See3CAM_30 camera.

Qtcam Application - 11.1.0
--------------------------
* Qtcam code refactored, codec id name is changed based on codec version and some of the application bugfixes.

Qtcam Application - 11.0.2
--------------------------
* Added multiple shots in trigger mode for See3CAM_12CUNIR camera.

Qtcam Application - 11.0.1
--------------------------
* Fixed issue of popup display "Image not saved in the location" when external trigger key pressed in econ's 1Mp monochrome, See3CAM_12CUNIR cameras

Qtcam Application-11.0.0
------------------------
* Added support for See3CAM_130 camera.

Qtcam Application-10.0.0
------------------------
* Added support for Ascella camera.

Qtcam Application-9.0.0
-----------------------
* Added support for See3CAM_CU30 camera.

Qtcam Application-8.0.2
-------------------------
* Added Qtcam support for ubuntu 15.10 and ubuntu 16.04 versions

Qtcam Application-8.0.1
-------------------------
* Code cleanup in Qtcam Application.

Qtcam Application-7.0.1
-----------------------
* Added support for logitech C920 Webcam Pro camera
* Added support for logitech C525 Webcam camera
* Added support for logitech C310 HD Webcam  camera
* Added support for logitech C615 HD Webcam  camera
* Added support for LifeCam HD-3000
* Added support LifeCam Cinema HD

Qtcam Application-4.0.1
-------------------------------
* Added support for all uvc cameras.
* switching of resolution is removed when still and video format, resolution are same to make faster.
* Video capture filter is renamed to Image Quality Settings.
* Video capture pin and Video Capture properties tabs are combined into Video Capture Settings tab.
* Still capture pin and still capture properties tabs are combined into Still Capture Settings tab.
* Qtcam logo is changed.
* Preview color format is displayed in status bar.


Qtcam Application-1.7.0
------------------------------
*Initial public release
