+++ Release 0.3.7 (2008-12-30) +++

2008-12-30 Guido Scholz <guido.scholz@bayernline.de>
	* TODO, NEWS: Entries updated.
	* man/*: New basic man page added.

2008-12-26 Guido Scholz <guido.scholz@bayernline.de>
	* data/decoders: Decoder file converted to UTF-8.

2008-12-23 Guido Scholz <guido.scholz@bayernline.de>
	* src/mainwindow.*: Menu for recently opened files added.
	* src/lococontrol.*: File format made more compact and faster to
	read, controller uses less frames to be painted.

2008-12-21 Guido Scholz <guido.scholz@bayernline.de>
	* src/mainwindow.*: Power state request at server login added.

2008-12-20 Guido Scholz <guido.scholz@bayernline.de>
	* src/*: All files with capital letters renamed to lower case
	letters.
	* src/mainwindow.*, messagehistory.*: Statusline with message
	history from spdrs60 added.
	* src/programmer.*: Programmer redesigned to use layout
	management

2008-12-19 Guido Scholz <guido.scholz@bayernline.de>
	* src/MainWindow.cpp: Server login procedure rewritten, toolbar
	for most importand user actions added
	* src/LocoControl.*: Reorganized file reading and writing
	* src/aboutdialog.*: New about dialog added.
	* src/listpropertiesdialog.*: New list properties dialog added.
	* src/serverinfodialog.*: New server info dialog added.
	* src/LocoDialog.*: Some layout management substituted fix
	item placement

2008-12-18 Guido Scholz <guido.scholz@bayernline.de>
	* src/commandport.*, infoport.*, srcpport.*, MainWindow.cpp:
	SRCP network control ports from spdrs60 introduced
	* src/translations/*: transation file handling reorganized

2008-12-15 Guido Scholz <guido.scholz@bayernline.de>
	* acinclude.m4, configure.ac, src/Makefile.am: Improved Qt3
	library detection, 64 Bit support (from spdrs60)
	* configure.ac, src/Makefile.am: Translation updates improved
	* src/MainWindow.cpp: Browser is started by QProcess now

2007-07-29 Guido Scholz <guido.scholz@bayernline.de>
	* config.sub, config.guess: updated versions
	* acinclude.m4: smaller version from spdrs60
	* configure.ac, main.cpp: Qt library translations usable without
	using QTDIR environment variable
	* configure.ac, src/Makefile.am: translation files (*.qm) now
	are build during make run

2005-09-28 Guido Scholz <guido.scholz@bayernline.de>
	* configure.ac, src/Makefile.am: translation files (*.qm) now
	are build during make run

Version 0.3.6-qt3-04 (2005-02-27)
=======================
* added spec file and desktop file for fedora
* updated spec file and desktop file for SuSE

Version 0.3.6-qt3-03 (2004-11-03)
=======================
* added some new loco pixmaps
* bottom region of LocoControl now ist layout manager controlled
* fixed enabling/disabling bug of power on/off buttons
* signal SIGPIPE is catched now, preventing program hang
* direction change now sends new status to server, enables loco light
  switching
* some layout cleanups in LocoControl
* brake button now is accessible by Ctrl-b
* brake button and emergency button are animated when key is pressed

Version 0.3.6-qt3-02 (2004-10-30)
=======================
* new naming schema due to debain dh_make errors (does not like "_")
* small fixes in src/Makefile.am (LDADD and moc)
* new preferences dialog
* preferences are saved in personal config file
* hostname and port are no longer supported as command line arguments
* online help accessible via browser
* code cleanups (removed dummy widget)
* necessary pixmaps are included to program binary
* new toolbar and statusline, visibility can be disabled

Version 0.3.6_qt3_01 (2004-10-21)
=======================
* Port to QT3
* German translation

Version 0.3.6 (7.12.01)
=======================
* Fixed errors in NMRA-Programmer

Version 0.3.5 (1.12.01)
=======================
* Fix for crash by long hostnames/ip-numbers
* Removed flicker with active Info-Port
* New brake to standstill with delay
* Further conditions to cancel delayed accelaration / brake:
	- Manual stimulation of the trottle
	- Interference by other controllers on the bus controlling the
	same engine
* Removed the reverse/forward-button from the loco configuration,
  added a "Reverse logic"-checkbox
* Emergency button is always enabled now
* Overworked documentation


Version 0.3.4 (29.04.01)
========================
* Fix for crash on off-track mode

Version 0.3.3 (12.03.01)
========================
* Now reads and keeps the setting of power on program startup
* Gets and uses status of new created/loaded loco from server
* Uses Info-Messages from the server

Version 0.3.2 (25.01.01)
========================
* Reanimated CTRL+X for emergency stop
* Use F1..F5-Keys for Functions
* Fix for crash with wrong hostname
* Fix for Uhlenbrock-Programmer
* Several other fixes

Version 0.3.1 (11.11.00)
========================
* Fix for Low/Av/Max-Speed Control-Widgets
* Added Environment for autoconf/automake
* Added spec-File for generation of RPMs
* Several bugfixes


Version 0.3.0 (31.10.00)
========================

* Port to Qt2
* Configurable decoders and protocols
* Programmer now uses SRCP 0.7.x
* Progressbar for Uhlenbrock-Programmer
* A lot of internal changes and Bugfixes
* New Documentation


Version 0.2.10 (7.10.00)
========================

* Zustzliche Tastaturcodes 
  (Space = Richtungswechsel, CTRL+X = Nothalt)
* Verbesserte Geschwindigkeits-Grobeinstellung mit Page-Up/Down
* Bugfixes an der Protokollimplementation
* Kein Ausschalten des Digitalstroms bei Programmende

Version 0.2.9  (29.5.00)
========================

* Bugfixes an der Protokollimplementation

Version 0.2.8  (6.5.00)
========================

* Umstellung auf SRCP 0.6.0

Version 0.2.7  (23.3.00)
========================

* Delete (Controller) ins Kontextmen aufgenommen
* Kommandozeilen-Erweiterung: Dateiname

Version 0.2.6  (19.3.00)
========================

* Berechnung der Vorbildgeschwindigkeit korrigiert
* Verzgerung blockiert nun nicht mehr das Programm
* SRCP-Kommunikation korrigiert (fhrende Nullen ergnzt)

Version 0.2.5  (13.3.00)
========================

* Umstellung des Kommandoformats auf SRCP - Simple Railroad Command Protocol
  0.2.2
* Korrektur der Fahrstufenanzahl bei verschiedenen Protokollen

Version 0.2.4  (2.3.00)
=======================

* Verzgerung wird nun automatisch deaktiviert, falls Acceleration und Breaking
  auf null gesetzt wird
* Dokumentation berarbeitet
* Speedanzeige besitzt nun auch ein Tooltip


Version 0.2.3  (20.2.00)
========================

* ber ein Kontextmen aufzurufen gibt es nun die Mglichkeit,
  die Einstellungen eines Controllers zu verndern


Version 0.2.2  (13.2.00)
========================

* Die Funktion der Richtungsumschaltung wurde verndert, bei DCC Decodern
  wird nicht Stufe 1 in Gegenrichtung gesendet
* Das Flag "modified" wird nicht mehr gesetzt bei abgebrochenem "New Loco"
  (und somit der Meneintrag "Save" nicht unntig aktiviert)
* ob man mit/ohne Beschleunigungs-/Bremsverzgerung fahren will, kann nun
  mit einem Compilerflag (oder per #define) Namens VERZOEGERUNG einstellen 
