libs Directory Reference

Files
file	ad9361_manager.h [code]
	An Analog Devices AD9361 front-end configuration library wrapper for configure some functions via iiod link.
file	ad936x_iio_custom.h [code]
	A direct IIO custom front-end driver for the AD936x AD front-end family with special FPGA custom functionalities.
file	ad936x_iio_samples.h [code]
	A class that holds a custom sample buffer for Analog Devices AD936x family front-ends.
file	fpga_buffer_monitor.h [code]
	Check receiver buffer overflow and monitor the status of the receiver buffers.
file	fpga_dma-proxy.h [code]
	FPGA DMA control. This code is based in the Xilinx DMA proxy test application: https://github.com/Xilinx-Wiki-Projects/software-prototypes/tree/master/linux-user-space-dma/Software.
file	fpga_dynamic_bit_selection.h [code]
	Dynamic bit selection in the received signal.
file	fpga_switch.h [code]
	Switch that connects the HW accelerator queues to the analog front end or the DMA.
file	gnss_sdr_timestamp.h [code]
	GNURadio block that adds to sample stream timestamp metadata information stored on a sepparated file.
file	gnss_sdr_valve.h [code]
	Interface of a GNU Radio block that sends a STOP message to the control queue right after a specific number of samples have passed through it.
file	pps_samplestamp.h [code]
	A simple container for the sample count associated to PPS rising edge.
file	ppstcprx.h [code]
	TCP client class for front-end PPS samplestamp information reception.
file	rtl_tcp_commands.h [code]
	Defines structures and constants for communicating with rtl_tcp.
file	rtl_tcp_dongle_info.h [code]
	Interface for a structure sent by rtl_tcp defining the hardware.