 |
GNSS-SDR
0.0.19
An Open Source GNSS Software Defined Receiver
|
|
GNSS-SDR
0.0.19
An Open Source GNSS Software Defined Receiver
|
Helper file for unit testing. More...
#include <gflags/gflags.h>#include <limits>#include <string>Go to the source code of this file.
Functions | |
| DEFINE_string (trk_test_implementation, std::string("GPS_L1_CA_DLL_PLL_Tracking"), "Tracking block implementation under test, defaults to GPS_L1_CA_DLL_PLL_Tracking") | |
| DEFINE_bool (enable_external_signal_file, false, "Use an external signal file capture instead of the software-defined signal generator") | |
| DEFINE_double (external_signal_acquisition_threshold, 2.5, "Threshold for satellite acquisition when external file is used") | |
| DEFINE_int32 (external_signal_acquisition_dwells, 5, "Maximum dwells count for satellite acquisition when external file is used") | |
| DEFINE_double (external_signal_acquisition_doppler_max_hz, 5000.0, "Doppler max for satellite acquisition when external file is used") | |
| DEFINE_double (external_signal_acquisition_doppler_step_hz, 125.0, "Doppler step for satellite acquisition when external file is used") | |
| DEFINE_bool (use_acquisition_resampler, false, "Reduce the sampling rate of the input signal for the acquisition in order to optimize the SNR and decrease the processor load") | |
| DEFINE_string (signal_file, std::string("signal_out.bin"), "Path of the external signal capture file") | |
| DEFINE_double (CN0_dBHz_start, std::numeric_limits< double >::infinity(), "Enable noise generator and set the CN0 start sweep value [dB-Hz]") | |
| DEFINE_double (CN0_dBHz_stop, std::numeric_limits< double >::infinity(), "Enable noise generator and set the CN0 stop sweep value [dB-Hz]") | |
| DEFINE_double (CN0_dB_step, 3.0, "Noise generator CN0 sweep step value [dB]") | |
| DEFINE_double (PLL_bw_hz_start, 20.0, "PLL Wide configuration start sweep value [Hz]") | |
| DEFINE_double (PLL_bw_hz_stop, 20.0, "PLL Wide configuration stop sweep value [Hz]") | |
| DEFINE_double (PLL_bw_hz_step, 5.0, "PLL Wide configuration sweep step value [Hz]") | |
| DEFINE_double (DLL_bw_hz_start, 1.0, "DLL Wide configuration start sweep value [Hz]") | |
| DEFINE_double (DLL_bw_hz_stop, 1.0, "DLL Wide configuration stop sweep value [Hz]") | |
| DEFINE_double (DLL_bw_hz_step, 0.25, "DLL Wide configuration sweep step value [Hz]") | |
| DEFINE_double (fll_bw_hz, 4.0, "FLL filter bandwidth [Hz]") | |
| DEFINE_bool (enable_fll_pull_in, false, "Enable FLL in pull-in phase") | |
| DEFINE_bool (enable_fll_steady_state, false, "Enable FLL in steady-state phase") | |
| DEFINE_double (PLL_narrow_bw_hz, 5.0, "PLL Narrow configuration value [Hz]") | |
| DEFINE_double (DLL_narrow_bw_hz, 0.75, "DLL Narrow configuration value [Hz]") | |
| DEFINE_double (acq_Doppler_error_hz_start, 1000.0, "Acquisition Doppler error start sweep value [Hz]") | |
| DEFINE_double (acq_Doppler_error_hz_stop, -1000.0, "Acquisition Doppler error stop sweep value [Hz]") | |
| DEFINE_double (acq_Doppler_error_hz_step, -50.0, "Acquisition Doppler error sweep step value [Hz]") | |
| DEFINE_double (acq_Delay_error_chips_start, 2.0, "Acquisition Code Delay error start sweep value [Chips]") | |
| DEFINE_double (acq_Delay_error_chips_stop, -2.0, "Acquisition Code Delay error stop sweep value [Chips]") | |
| DEFINE_double (acq_Delay_error_chips_step, -0.1, "Acquisition Code Delay error sweep step value [Chips]") | |
| DEFINE_double (acq_to_trk_delay_s, 0.0, "Acquisition to Tracking delay value [s]") | |
| DEFINE_int64 (skip_samples, 0, "Skip an initial transitory in the processed signal file capture [samples]") | |
| DEFINE_int32 (plot_detail_level, 0, "Specify the desired plot detail (0,1,2): 0 - Minimum plots (default) 2 - Plot all tracking parameters") | |
| DEFINE_double (skip_trk_transitory_s, 1.0, "Skip the initial tracking output signal to avoid transitory results [s]") | |
| DEFINE_int32 (extend_correlation_symbols, 1, "Set the tracking coherent correlation to N symbols (up to 20 for GPS L1 C/A)") | |
| DEFINE_int32 (smoother_length, 10, "Set the moving average size for the carrier phase and code phase in case of high dynamics") | |
| DEFINE_bool (high_dyn, false, "Activates the code resampler and NCO generator for high dynamics") | |
| DEFINE_bool (plot_gps_l1_tracking_test, false, "Plots results of GpsL1CADllPllTrackingTest with gnuplot") | |
Helper file for unit testing.
GNSS-SDR is a Global Navigation Satellite System software-defined receiver. This file is part of GNSS-SDR.
Copyright (C) 2010-2020 (see AUTHORS file for a list of contributors) SPDX-License-Identifier: GPL-3.0-or-later
Definition in file tracking_tests_flags.h.
1.8.14