adapters Directory Reference

Files
	ad936x_custom_signal_source.h
	A direct IIO custom front-end gnss-sdr signal source for the AD936x AD front-end family with special FPGA custom functionalities.
	adrv9361_z7035_signal_source_fpga.h
	Signal source for the Analog Devices ADRV9361-Z7035 evaluation board directly connected to the FPGA accelerators. This source implements only the AD9361 control. It is NOT compatible with conventional SDR acquisition and tracking blocks. Please use the fmcomms2 source if conventional SDR acquisition and tracking is selected in the configuration file.
	custom_udp_signal_source.h
	Receives ip frames containing samples in UDP frame encapsulation using a high performance packet capture library (libpcap).
	dma_signal_source_fpga.h
	signal source for a DMA connected directly to FPGA accelerators. This source implements only the DMA control. It is NOT compatible with conventional SDR acquisition and tracking blocks.
	fifo_signal_source.h
	Header file of the class for retrieving samples through a Unix FIFO.
	file_signal_source.h
	Interface of a class that reads signals samples from a file and adapts it to a SignalSourceInterface.
	file_source_base.h
	Header file of the base class to file-oriented signal_source GNSS blocks.
	file_timestamp_signal_source.h
	This class reads samples stored in a file and generate stream tags with its timestamp information stored in separated file.
	flexiband_signal_source.h
	ignal Source adapter for the Teleorbit Flexiband front-end device. This adapter requires a Flexiband GNU Radio driver installed (not included with GNSS-SDR)
	fmcomms2_signal_source.h
	Interface to use SDR hardware based in FMCOMMS2 driver from analog devices, for example FMCOMMS4 and ADALM-PLUTO (PlutoSdr).
	fmcomms5_signal_source_fpga.h
	Signal source for the Analog Devices FMCOMMS5 directly connected to the FPGA accelerators. This source implements only the AD9361 control. It is NOT compatible with conventional SDR acquisition and tracking blocks. Please use the fmcomms2 source if conventional SDR acquisition and tracking is selected in the configuration file.
	four_bit_cpx_file_signal_source.h
	Interface of a class that reads signals samples from a 2 bit complex sampler front-end file and adapts it to a SignalSourceInterface.
	gen_signal_source.h
	It wraps blocks that generates synthesized GNSS signal and filters it.
	gnmax_signal_source.h
	gnMAX2769 USB dongle GPS RF front-end signal sampler driver
	ion_gsms_signal_source.h
	GNSS-SDR Signal Source that reads sample streams following ION's GNSS-SDR metadata standard.
	labsat_signal_source.h
	LabSat version 2, 3, and 3 Wideband format reader.
	limesdr_signal_source.h
	max2771_evkit_signal_source_fpga.h
	Signal source for the MAX2771EVKIT evaluation board connected directly to FPGA accelerators. This source implements only the MAX2771 control. It is NOT compatible with conventional SDR acquisition and tracking blocks.
	multichannel_file_signal_source.h
	Implementation of a class that reads signals samples from files at different frequency band and adapts it to a SignalSourceInterface.
	nsr_file_signal_source.h
	Implementation of a class that reads signals samples from a NSR 2 bits sampler front-end file and adapts it to a SignalSourceInterface. More information about the front-end here http://www.ifen.com/products/sx-scientific-gnss-solutions/nsr-software-receiver.html.
	ntlab_file_signal_source.h
	Interface of a class that reads signal samples from a file. Each sample is two bits from multiple channels.
	osmosdr_signal_source.h
	Signal source wrapper for OsmoSDR-compatible front-ends, such as HackRF or Realtek's RTL2832U-based USB dongle DVB-T receivers (see https://osmocom.org/projects/rtl-sdr/wiki for more information).
	plutosdr_signal_source.h
	Signal source for PlutoSDR.
	raw_array_signal_source.h
	CTTC Experimental GNSS 8 channels array signal source.
	rtl_tcp_signal_source.h
	Signal source which reads from rtl_tcp. (see https://osmocom.org/projects/rtl-sdr/wiki for more information).
	signal_source_base.h
	Header file of the base class to signal_source GNSS blocks.
	spir_file_signal_source.h
	Implementation of a class that reads signals samples from a SPIR file and adapts it to a SignalSourceInterface.
	spir_gss6450_file_signal_source.h
	Implementation of a class that reads signals samples from a SPIR file and adapts it to a SignalSourceInterface.
	two_bit_cpx_file_signal_source.h
	Interface of a class that reads signals samples from a 2 bit complex sampler front-end file and adapts it to a SignalSourceInterface.
	two_bit_packed_file_signal_source.h
	Interface of a class that reads signals samples from a file. Each sample is two bits, which are packed into bytes or shorts.
	uhd_signal_source.h
	Interface for the Universal Hardware Driver signal source.
	zmq_signal_source.h
	Signal source which reads from ZeroMQ.