|
Public Attributes |
|
int | bit_rate |
| | The maximum permitted bit rate of the modem. Valid values are 1200 and 2400.
|
|
int | calling_party |
| | TRUE is this is the calling side modem.
|
|
get_bit_func_t | get_bit |
| | The callback function used to get the next bit to be transmitted.
|
|
void * | get_bit_user_data |
| | A user specified opaque pointer passed to the get_bit callback routine.
|
|
put_bit_func_t | put_bit |
| | The callback function used to put each bit received.
|
|
void * | put_bit_user_data |
| | A user specified opaque pointer passed to the put_bit callback routine.
|
|
modem_rx_status_func_t | status_handler |
| | The callback function used to report modem status changes.
|
|
void * | status_user_data |
| | A user specified opaque pointer passed to the status function.
|
|
int | negotiated_bit_rate |
|
struct { |
| float rrc_filter [27] |
| | The route raised cosine (RRC) pulse shaping filter buffer.
|
| int rrc_filter_step |
| | Current offset into the RRC pulse shaping filter buffer.
|
| uint32_t scramble_reg |
| | The register for the data scrambler.
|
| int scrambler_pattern_count |
| | A counter for the number of consecutive bits of repeating pattern through the scrambler.
|
| int training |
| | 0 if receiving user data. A training stage value during training
|
| int training_count |
| | A count of how far through the current training step we are.
|
| int signal_present |
| | >0 if a signal above the minimum is present. It may or may not be a V.22bis signal.
|
| float training_error |
| | A measure of how much mismatch there is between the real constellation, and the decoded symbol positions.
|
| uint32_t carrier_phase |
| | The current phase of the carrier (i.e. the DDS parameter).
|
| int32_t carrier_phase_rate |
| | The update rate for the phase of the carrier (i.e. the DDS increment).
|
| float carrier_track_p |
| | The proportional part of the carrier tracking filter.
|
| float carrier_track_i |
| | The integral part of the carrier tracking filter.
|
| qam_report_handler_t qam_report |
| | A callback function which may be enabled to report every symbol's constellation position.
|
| void * qam_user_data |
| | A user specified opaque pointer passed to the qam_report callback routine.
|
| power_meter_t rx_power |
| | A power meter, to measure the HPF'ed signal power in the channel.
|
| int32_t carrier_on_power |
| | The power meter level at which carrier on is declared.
|
| int32_t carrier_off_power |
| | The power meter level at which carrier off is declared.
|
| float agc_scaling |
| | The scaling factor accessed by the AGC algorithm.
|
| int constellation_state |
| float eq_delta |
| | The current delta factor for updating the equalizer coefficients.
|
| complexf_t eq_coeff [2 *7+1] |
| complexf_t eq_buf [15+1] |
| int eq_step |
| | Current offset into the equalizer buffer.
|
| int eq_put_step |
| | Current write offset into the equalizer buffer.
|
| int gardner_integrate |
| | Integration variable for damping the Gardner algorithm tests.
|
| int gardner_step |
| | Current step size of Gardner algorithm integration.
|
| int total_baud_timing_correction |
| | The total symbol timing correction since the carrier came up. This is only for performance analysis purposes.
|
| int baud_phase |
| | The current fractional phase of the baud timing.
|
| int sixteen_way_decisions |
| int pattern_repeats |
| int last_raw_bits |
| } | rx |
|
struct { |
| float gain |
| | The gain factor needed to achieve the specified output power.
|
| complexf_t rrc_filter [2 *9] |
| | The route raised cosine (RRC) pulse shaping filter buffer.
|
| int rrc_filter_step |
| | Current offset into the RRC pulse shaping filter buffer.
|
| unsigned int scramble_reg |
| | The register for the data scrambler.
|
| int scrambler_pattern_count |
| | A counter for the number of consecutive bits of repeating pattern through the scrambler.
|
| int training |
| | 0 if transmitting user data. A training stage value during training
|
| int training_count |
| | A counter used to track progress through sending the training sequence.
|
| uint32_t carrier_phase |
| | The current phase of the carrier (i.e. the DDS parameter).
|
| int32_t carrier_phase_rate |
| | The update rate for the phase of the carrier (i.e. the DDS increment).
|
| uint32_t guard_phase |
| | The current phase of the guard tone (i.e. the DDS parameter).
|
| int32_t guard_phase_rate |
| | The update rate for the phase of the guard tone (i.e. the DDS increment).
|
| float guard_level |
| int baud_phase |
| | The current fractional phase of the baud timing.
|
| int constellation_state |
| | The code number for the current position in the constellation.
|
| int shutdown |
| | An indicator to mark that we are tidying up to stop transmission.
|
| get_bit_func_t current_get_bit |
| | The get_bit function in use at any instant.
|
| } | tx |
|
logging_state_t | logging |
| | Error and flow logging control.
|